Before you even start planning, you need to submit a “pre-application form” so that Irish Water can tell you if a connection is possible. You must receive a “feasibility confirmation” before you can submit your project. This project must comply with the new standards and code of conduct in order for you to obtain “Design Acceptance.” It is only when you have received acceptance of the design that you can submit a “connection application.” And this must be done before a “binding agreement” is offered to you. The follow-up agreement establishes strict construction and verification requirements, which must be properly recorded in the SQ guidelines in order to comply with Irish Water`s inspection and audit plan. As part of the agreement, you must meet with an Irish water field engineer before you start moving the drainage as agreed in the plan. Irish Water can perform quality assurance on site at any time to ensure that what is proposed complies with the new standards. These standards are much stricter and require much more work on your part than in the past. Once this has been done in compliance, you will receive a certificate of compliance. To get a more accurate overview of the participants, read the Irish Water Quality Assurance Field (QA) As part of your connection agreement, once you have put all the pipes in the ground, press, test all drainage lines, fittings and pump marshes. Requirements may vary depending on whether it is a sewer, a service connection or another type of system. Although they are all listed in Appendix 3 of the Irish Water Field Inspection Needs Manual (QA), we found that this is a very problematic area for many developers. The owners are familiar with the local authorities they need for canal connections and who end up heading to a canal or a pumping station. Irish Water`s new self-lay agreement is a much more difficult process than before.
In the past, it was enough to file the building permit, a connection to the canal, and then an investigation of the CCTV before it was handed over to the local authority. It`s much more than that. Our experience is that many contractors, contractors and developers are in trouble in some key areas, especially during print testing. Keep reading if you want to avoid encountering these problems. Irish water distinguishes between the design phase and the construction phase. It is only when your first design has been adopted that you will receive a “Connection Offer” from Irish Water. Once you have accepted it (binding contract), you are still subject to verification during all aspects of the construction and testing phase. Once you have accepted the agreement, all constructions, reviews and documentation must comply with the quality assurance approach described in its manual (as well as all statutes and regulations).
You must conduct an investigation to verify the location and height of the connection point with the existing Irish water system, and everything related to the construction must be recorded accurately (i.e.